TKS VC forming BOX
Description
Yo fam ! Here the simple VACUUM FORMING BOX 3D printable from A to Z and its working as intended . I know there're already some VC box but i was looking for something simple, small and easy to use for all the FPV community , mainly for Whoop Pilot and micro . The idea behind this is to use your trash plastic and recycle it to make your own canopy from let's say Milk Jug , Oil Jug , Laundry bottle and so one anything that is HDPE and PP . For me Mold you can find some here on thingiverse but if you can't find any let me know on Facebook or here . Filaments used here is High Temp PC ( Polycarbonate ) and it work perfectly ! Assembly : 1- Top Plate must be glued with SuperGlue on the box and wait at least 48hrs . 2- Plastic Holder ; you need to print these 2; the 1cm and the 5mm and use (4mm screw x 15mm ) x 4 Other things you will need : 1- Shopvac ( walmart and Homedepot has some cheap one ) 2- Headgun ( same here ) 3- Your HDPE plastic . MOLD : https://www.thingiverse.com/thing:3350217 ( Single one ) https://www.thingiverse.com/thing:3032794 ( Good TW canopy Collection ) https://www.thingiverse.com/thing:3816073 (Single one )
Statistics
Likes
101
Downloads
0