5l water bottle hose adapter
Description
This design allows to connect 6mm(inner diameter) hose to 5l or bigger water bottle.This adapter is air tight i used this in my compressor (2atm) to attach bottle as expansion tank. To instal this adapter you need to drill 10mm hole in center of the cap. You also need: - four M4x20 screws with nuts and washers - silicon sealant (for best result use neutral one, not acid) or rubber seal I used silicon to make this air tight, you need to applay it beetwen each half and bottle cap, also it's good idea to add a little bit in screw holes. You can choose between two designs, 28mm or 35mm outer diammeter. It depends on how big is you bottle cap. To connect hose warm it a little bit.
Statistics
Likes
6
Downloads
0