Mighty Mule GTO PRO 1000 700 1200 Gate Opener Limit Switch Adjuster Bracket
Description
The limiter switch mount on my Mighty Mule GTO 1000 gate opener broke several times! I glued it together twice, then it broke again. After not being able to find a suitable replacement, I decided to make my own, and add some structural improvements. The switch has a full box to contain it There are wire channels on the back The track piece runs almost the full length (you can see where the other one broke) I used ABS for strength. I updated the original switchMountV2 it gives more room for adjustment. Gate was not able to open fully with the first version. I also fixed the dip switch lock points spacing. If you use the one below, it should click right in! Parts Used - ylewet 25Pcs AC 1A 125V 3Pin SPDT Limit Micro Switch https://www.amazon.com/gp/product/B073TYWX86/ Knurled Threaded Insert, 1/4 inches-20 x 6mm L x 8mm https://www.amazon.com/gp/product/B07LBRCRP6/ I used this soldering iron tip for setting the knurled thread into the hole. https://www.amazon.com/gp/product/B07VR4LBZ7
Statistics
Likes
0
Downloads
0