Clip for telescopic fishing net
Description
this is a pocket clip for a telescopic fishing net. similar to the one on very expensive net by Daiwa or Shimano. you ready your net and clip it behind you, when the moment come you unclip and with a downward forward action the net extend to the water. could also be useful when you have to change spot and your hands are full. made in two part, but printed as one. it has 5mm holes screws to clamp it onto the fishing net shaft. i printed my prototype with only 20% infill, but it seems to be enough for light use. if you are planning to get rough use 50%+ infill. it is made for a net with a 21mm round shaft. if your net is smaller you could add some grippy spacer like part of an inner tube onto your net to make up the difference.
Statistics
Likes
1
Downloads
0