RJ45 receptacle housing
Description
Two Items need to be printed, PLA with 0,2mm steps should work (upper and lower part is identical) RJ45 receptacle (8p8c9 fit in the printed housing, either sticky tape or cable tie hold both parts together. I use this housing to connect two rj45(8p8c) receptacles in order to connect LXNav LX8000 from its PDA port to Oudie Adapter with regular Ethernet cables. The pinouts of both devices are not compatible, so i brought LX Nav PDA port to IGC Standard - without power (just GND RX/TX)
Statistics
Likes
0
Downloads
0