Led matrix bracket
Description
A bracket to join 4 led matrix panels (32x32 leds; 4mm led spacing) together to create a 64x64 panel. Holes are 3mm on the bracket; you can drill the holes to 4mm to give you some flex in aligning the gap between the panels. Mounting in a U-loop (U-mapper) pattern or as a straight matrix are possible. Print at 0.2mm layer height should be fine. No specials like support needed. LED panels used in this build: PH4-16S2M2121-v1.1; 32x32 leds; 4mm spacing
Statistics
Likes
2
Downloads
0