Wig Stand and Moneybox for small printers
Description
A wig stand designed for smaller printers. The 2 piece snap-in design is perfect for bigger wigs and for smaller printers. BONUS PART: the holder is designed with an internal tank for 2 main uses: - It can be filled with sand or heavy material to increase stability - It can be used as a money box since there's a canal in the TOP component to fill it (you can save money for your next wig) Here you can find a video of the wig holder: https://youtu.be/xIJnNgCUeA0 The active area of your printer must be at least 220mm x 220mm x H220mm (ender 3 should be ok) Both components of the wig stand must be printed in vase mode. *No supports are needed.* All designs are designed to be printed in spiralized outer contour (vase mode) with 0.6mm line width. This will guarantee no seam and fast and consistent print. You can use a 0.6mm diameter nozzle or just tweak the line width via SW using CURA. With a 0.4mm nozzle you can reach up to the double of line width, 0.8mm. There are 2 parts of the wig stand: - The bottom part: must be printed in spiralized outer contour - The top part: must be printed in spiralized outer contour but WITHOUT the bottom (just select 0 layers for the bottom) Share your result posting a MAKE, thank you. Print it and share your results. It's easy! Click "post a make" or download [3D Geeks: for 3D Printing APP](https://play.google.com/store/apps/details?id=work.twob.threed) and take a pic! I'll be happy to know that my design was helpful to someone.
Statistics
Likes
3
Downloads
0