X-maxx Max5 ESC plate - Radio relocation box -Updated-
Description
# Max 5 ESC plate and Radio relocation box. This is for relocating the radio receiver in the Traxxas X-Maxx to mount the Hobbywing Max5 in-between the rails for lower center of gravity and without modifications to the chassis. I modeled the ESC plate as a template, should probably use an aluminum or stainless plate but making the plate with whatever you want should work fine. Note: If your pairing the Max5 with the 800k 56113 motor, the receiver box with the seal is a little bit longer and may interfere with the motor making a tight fit. I used the WFO motor mount and it works, its just tight. Other motor mounts may not be as thick and provide more clearance. 09/05/2021: I knew there were a few issues that I hadn't gotten around to fixing in my initial release. Sorry its taken me so long to get the objects fixed. Updated dimensions on boxes and seals. Fixed a small hole I hadn't noticed under the antenna mount. 11/10/2021: Fixed hole spacings on esc plate. I had totally forgot the spacing was off when I printed the template initially. Had to print again and found that it was off. Added an ESC plate to print and mount with M3x6 flush screws, not sure what the best material would be but its for sure not PLA as it will soften. Still recommend making a plate out of Aluminum or Stainless steel.
Statistics
Likes
13
Downloads
0