Delta Effector Orbiter 40mm/QQ-S
Description
This is an effector housing and fan ducts I designed for my QQ-S Pro. It should work with any delta that has 40mm rod spacing. Features: Angled orbiter to main clearance of rods over build area Spots for 5mm led lights to illuminate nozzle/ print area Missing mounting option for stock leveling sensor, you must use piezo underbed or nozzle probe. Required hardware: Orbiter extruder v1.5 25mm fan for hotend cooling 2x3010 blower fan for part cooling Dragon hotend You will need the following 2.5mm socket head screws to attach the fans 4x4mm, 4x8mm and 4x16mm 8 m3 heatset inserts Optional 5mm leds Small length of PTFE tube between housing and extruder, flush cut to fit *Added 51mm Variant 3/20/21: After some experimenting I moved the arm mounting points higher to better balance the weight. This has greatly helped the wobble. The high mount variant is the better option.
Statistics
Likes
18
Downloads
0