Hyperlite Floss 3.0 7" Long Range GoPro 5/6/7 GPS FPV Camera XT60 Cap Mount

Description

Here is a collection of 3d printed parts for the Hyperlite Floss 3.0 quad. Below I have sited my sources for all the remixed files. If you are interested in the Hyperlite Floss 3.0 HD Long Range Build, check it out here: https://rotorbuilds.com/build/25691 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ STL Files ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Air_Unit_DJI_Mount_-_Left_Floss_3.0.stl Air_Unit_DJI_Mount_-_Right_Floss_3.0.stl These are unedited mounts for the DJI Air Unit and I got them from here: https://www.thingiverse.com/thing:4525520 GP_Base_v19.stl I remixed 2 different files to make the GoPro mount and SMA antenna holders. Here is a link to the original files: https://www.thingiverse.com/thing:4666570 https://www.thingiverse.com/thing:3704334 GP_Lens_protector_v5.stl GP_Mount_v6.stl The GoPro case works with out the Lens Protector but I remixed it so it will stay on better and it will keep the GoPro from falling out of the mount. The original designer suggested use a firmer TPU for the lens protector. Here is a link to the original files: https://www.thingiverse.com/thing:4540779 GPS 20 Degree.stl GPS 10 Degree.stl The GPS mounts was remixed to fit the TBS M8 GPS module. Here is a link to the original files: https://www.thingiverse.com/thing:4707123 XT60_Capacitor_Mount.stl I am not sure why the original file has a brim included with the STL file, so I cut it out. Here is a link to the original files: https://www.thingiverse.com/thing:3704334 The only thing I did NOT include is the FPV camera mount, because it was a purchased model. I am not sure if the original designer want his STL file posted on here for free. If you are interested in purchasing it, you can find it here: https://cults3d.com/en/3d-model/various/hyperlite-floss-v2-dji-fpv-conversion UPDATE (October 2021) Floss_Node_Short_11.stl GP7_Short_v06.stl The old camera mount, I had a problem with the props being in the camera’s view when I set the GoPro to “Superview.” And I also felt that the GoPro was sitting a tad higher than I like and made it top heavy. So, the updated mount, I lowered the camera mount and pushed it forward.

Statistics

Category

Tags