Delta 36-725 Table Saw Dust Catch
Description
Saw a YouTube video on stopping dust from falling to the floor using the Delta 36-725 or 36-5000 table saw. Credit goes to Richard Crees and his YouTube channel for designing the wood and sheet metal version of the dust catch that inserts into the blade shroud of the table saw. You can see how it inserts and works on his video at https://www.youtube.com/watch?v=ZYQd1kgf-q0&lc=UgzsLvB0u8dut1_h_ad4AaABAg.9J9uiJUFSWd9KdLaC_IA6z Keep in mind it may be good to do this print in solid 100% infill as you will have to file down a corner a little to get it to work properly with the standard table saw blade insert plate due to the finger hole that is stamped in it. Also you may have to cut the top of the 3d printed dust catch if you're using a zero insert as that will be thicker and with the 3d printed dust catch installed, you will not be able to put the zero insert plate in properly. It definitely is sturdy enough at 20% infill though, but if you file down the edge for the insert finger hole, you'll have exposed infill.
Statistics
Likes
16
Downloads
0