Soap & Detergent Bottle Holders
Description
Trying to get every drop out of your soap or detergent bottle? Can't get the bottle to stand upside down on its own without falling over on the counter? Want to drain every drop of liquid from one bottle into another container? Problem Solved! This soap bottle holder supports a wide range of bottle sizes and offer bottle stabilizers that clip to the frame to support narrow and irregularly shaped bottles. The detergent holder is designed to help support a laundry detergent bottle that is almost empty. The legs for this soap and detergent holder are interchangeable between the two holders. The soap holder frame can be used on the legs or on the extenders. The bottle stabilizer clips can be attached to either side of the soap holder frame. ASSEMBLY INSTRUCTIONS: 1. Insert legs onto frame 2. Place legs onto drip tray or detergent stabilizing frame PLEASE READ THE FOLLOWING PRINTING INSTRUCTIONS CAREFULLY: - Print the extenders with 100% infill to prevent the prongs from breaking off during removal from the soap holder frame. - I printed these objects at .20 resolution. - The legs should fit tightly into the frames so that they fully stabilize the frame and support the bottles. I have included 6 leg files from 3.5 - 4mm in thickness so you can find one that works for your printer settings and printer. I suggest test printing one of each to find the one that works best with you printed frame. (For my printer, 3.9mm was the correct thickness). - If you'd like a more durable product, print using PET or PETG instead of PLA.
Statistics
Likes
6
Downloads
0