Backwards Electric fence clip
Description
this is a backwards Electric fence T-Post clip that I designed through about 10 iterations until I was satisfied that it was robust enough for use. I designed it since the standard insulators that you can buy at the store only step off of the T-Posts in one direction. This one will give you the option to put it on the other side. One could use a store bought clip along this one if you wanted electric wires on both sides of the fence as I did. It will clip at any height since it will clip in between the rungs(spine) of the T-Post. It is roughly a 2 inch offset for the poly wire material. I'll upload some photos of it in action later... stay tuned. this isn't meant for coner attach points, but works well in-between start and stop points.
Statistics
Likes
1
Downloads
0