Sony FX6 Hoodman H32MB Loupe Adapter
Description
This adapter allows you to mount a Hoodman H32MB Loupe to a Sony FX6. This very is easy to print and uses little material for a good result. All you will need is: - Print the adapter - 2 x O-Rings (20-25mm) or equivalent to mount it to the FX6 screen - 2 x M3 25mm nuts/bolts or equivalent for the hinge - Tripod screw (1/4 20) to attach the Hoodman H32MB There are a couple of "washers" in case you Tripod Screw is too long. This is my first Loupe, so while I've nothing to compare it to, my first impressions are positive: - It is much better/clearer using the Loupe without my reading glasses than the Screen with reading glasses - Is firmly attached, and flips up - The adapter itself is only 15mm so a bit smaller then the stock FX6 sun shade - The loupe + adapter weighs 150g and their is no issue with FX6 screen drooping - Eye position does seems to matter else edges can be soft with chromatic aberration - I'm going to have to change my rig around about so that it falls more naturally to where my right eye is when using my "el cheapo" shoulder rig. There is also a version that includes a replacement for the Hoodman main body making the whole setup even lighter - https://www.thingiverse.com/thing:4793634 . Optional Eye Cap / Flap / Cover is here - https://www.thingiverse.com/thing:4794805 Hinge is from https://www.thingiverse.com/thing:2187167/comments
Statistics
Likes
2
Downloads
0