Angled Picatinny Hand Grip
Description
This is an Angled Picatinny Hand Grip. It has a built in stop on the front and the back for comfort. I designed it around using M5 bolts. The bolts that I used were M5 x 35mm allen key dome top. I screwed them in and then cut the to length using a grinder, or if you dont have one a dremel works fine. The screws can be over tightened because it was designed to be a friction fit into the plastic. The holes taper down on one side to allow the bolts to slide in and screw in a bit more easily. If you have any questions please leave a comment. This is a link to some bolts you can buy:https://www.amazon.com/FullerKreg-M5-0-8-Finish-Button-Socket/dp/B07BS51B7F/ref=sr_1_14?dchild=1&keywords=m5+x+35+bolts&qid=1615629317&sr=8-14
Statistics
Likes
6
Downloads
0