Lycanthrope: werewolf fursuit head-base, nose and teeth
Description
(it's fine to sell fursuits made WITH this, but you may not sell the base itself) UPDATE: added "cut" versions. this will fit ender-sized printers. -you will need to print one and a flip for A and B and then glue them together (lower jaw should fit as-is) -part A will need to be rotated to fit In my sample photo, the nose is printed a bit larger than default. Depending on the look you want for your head, it's safe to print the nose a little larger or smaller than the rest of the head. -the "talk jaw" should probably not be made with rubber bands, I'm just doing this to keep my prints together until I start assembling the heads. print at 240-250% for all parts, at 245% it will take a 40mm glass cabochon it's a good idea to do a smaller test print first, to make sure you're happy with your settings. I maintain an info document here: https://docs.google.com/document/d/1Nij-ovIhcxOxUT8PBZgI4saLcwwqKpIGH8ICAw7E2Uw/edit?usp=sharing this will answer most questions, and I can be contacted on twitter for more help. I'm using the googledoc, so I can easily update the information across multiple posts.
Statistics
Likes
68
Downloads
0