foam bath doser and foaming agent
Description
**The Problem:** I like to produce nice foam in the bath.. - In case I just put it in the bath at once it' not as nice foam as possible - In case I add it slow along with the jet of water it is hard to dose **The Idea:** A thing attached to the tap having a tank (for dosing the bath additive - max. about 50ml) and a hole at the bottom (for foam production along with the jet of water). The hole is at the lowest point of the tank and that part reached slightly into the water jet. **The Result:** The tank can be filled full, half or in-between, depending on the additive, amount of water and individual needs. **Usage:** Attach to tap Open tap and adjust water temperature Fill the tank with bath additive Wait - the water additive mix will generate a nice foam Once the tank is empty (after 2 to 4 minutes) spill the thing and let it dry Close the tap and check the temperature again Enjoy the bath with a lot of nice foam
Statistics
Likes
3
Downloads
0