Makermade M2 Rigid 22002 mount
Description
This is a bracket to use a Rigid 22002 router on the Makerverse M2 kit (Maslow). Print the "Alignment Plate" and use the 4 original mount screws to fix it in place, then mark and drill the 1/2 in holes for the new bolts. Print the bracket, either upside down without supports, or right side up with supports touching the BUILDPLATE ONLY. I printed mine with 2 walls and 20% infill and its holding, but it wouldn't hurt to double the walls and infill for extra strength.
Statistics
Likes
3
Downloads
0