Resin Parts Processing Washer
Description
***Update: Tested and this one works way too good even with the stock nozzle on the sprayer. {{{Wear PPE(personal protective equipment)}}}. That said I only use a couple pumps and mist the part. Version 2 will be a full on self contained washing assembly with fluid filters/fill ports and drain ports/ then maybe some water proof UV LED lights. TBA*** A very contained resin parts washing station. Home Depot bucket and Garden Sprayer are the bought materials. Print parts, cut hole in lid, glue PRINTED sprayer and lid together. Add sealant if you want. **(If you do, make sure you keep the lid loose or drill some air holes to let out air pressure. Speaking of pressure, be sure to always "turn on" the pressure release valve. This keeps pressure building up due to the nature of alcohol/acetone.)** The sprayer I bought from Home Depot was like 20 bucks. Buckets are up to 5 bucks depending on the size. Let me know if you need hose adaptors. 11mm ID hose to connect the printed nozzle. 6mm ID hose to connect my particular sprayer from Home Depot after cutting the stock nozzle off at a length to allow for a hose to slide on. References Used: https://grabcad.com/library/pressure-sprayer-sterilization-1 https://grabcad.com/library/paint-bucket-5-gallons-1 https://www.thingiverse.com/thing:2453411
Statistics
Likes
1
Downloads
0