Malt Mill mount and box
Description
Mount for a windshield wiper motor and box for electronics. Distance from bottom to center of motor pin is 68mm so you might need to adjust it to your grain mill. c/c on the holes of the motor is 40mm ## Here are links for the parts * Motor: https://www.skruvat.se/show.aspx?k=17363 * Coupler:https://banggood.app.link/fuxLbYwZAeb (10mmx12mm) ## Then you can source the following wherever: * m6 extension nut (m6x30) where you file half of it round to fit in the coupler * XT60 connector between box and motor * Circular power switch 20mm diameter _(or larger if you want to drill)_ * dc powerjack (https://banggood.app.link/gM6wD2KAEeb) * 3x m6x30 _(fasten motor to mount)_ * 2x zipties _(fasten box to motor)_ * 5x woodscrews _(fasten mount to millplate)_
Statistics
Likes
0
Downloads
0