Radius Gauge +/- 0.2mm Accuracy
Description
Radius Gauge If this designs helps you in any way, do you mind leaving me a quick tip via paypal? http://paypal.me/avicode Even the smallest donation helps support my effort in creating amazing 3D print designs for everyone. F3D also attached so you can edit if required. Please see picture for formula, which are derived from the original. Unlike the original, for this one, the zero setting should be the same as the zero setting for the actual caliper, since the caliper fits into the tool fully, and there is no extra length to be considered! Easier math! Also, for simpler math, the distance between the 2 prongs is intentionally set at exactly 75mm and no decimals! Formula 1 (For radius that fits within the 2 prongs): R = d x 2.414 (also engraved on the part) Formula 2 (For radius that fits outside the 2 prongs): R = ((75^2)+4*(d^2))/(8*d) Also - thanks for the huge interest in this design! That does greatly motivate me to think of more solutions and add to this community! Please feel free to leave a comment if you have any questions or need any help.
Statistics
Likes
772
Downloads
0