SKR Mini E3 v2.0 Dummy
Description
Dummy SKR Mini E3 v2.0 board for use to aid in design of enclosures. Included are all major (size) components (outside dimensions). In e.g. the stock Ender 3 Pro case the board sits on top of 4.2mm "stilts" -- but note that the component pins extend ~2mm beneath the board. Note: BTT published a [highly detailed model](https://github.com/bigtreetech/BIGTREETECH-SKR-mini-E3/blob/master/hardware/BTT%20SKR%20MINI%20E3%20V2.0/3D/BTT%20SKR%20MINI%20E3%20V2.0.step) of this board. However, their model does not include the PCB screw holes. Reference: [board dimensions](https://github.com/bigtreetech/BIGTREETECH-SKR-mini-E3/blob/e2ca139df46399a34479e39f18b9cbf3e6f6f7ca/hardware/BTT%20SKR%20MINI%20E3%20V2.0/Hardware/BTT%20SKR%20MINI%20E3%20V2.0-SIZE.pdf) published by BTT --- CHANGELOG: 6/13/21: Tweaked the position of all screw holes excepting lower-left (closest to origin) 4/7/21: Small size/position adjustments: - The short wire terminal is now set back from left (X=0) edge of the board - EXP1 block is wider by .28mm - Micro-USB port is narrower by .1mm - Micro SD card reader is narrower by .34mm - All components across the bottom (Y=0) edge of the board have had their positions adjusted
Statistics
Likes
12
Downloads
0