Folgertech i3 Acrylic X-Axis (X-Gantry) Motor End and Idler End
Description
Rework of 2 Things: https://www.thingiverse.com/thing:4441076 and its rework https://www.thingiverse.com/thing:1242343. Edited in Tinkercad. I tried to minimize the need for PETG supports, that Cura 4.8.0 wouldn't "let" me place further than 2x the layer height from the model, by making the gap directly at the top instead of offset on the side. It is also mirrored twice: once, to print the flat of both of the models towards the frame, and twice to print the motor end on the right like the Folgertech Acrylic i3 original design. I also made up two "support blocker" files to allow, in Cura 4.8.0 anyways, to "print" as "Mesh Type": "Don't Support Overlaps" so that supports would print in the majority of the belt cavities but not where it was most unneeded for the horizontal rods and vertical axis parts to print with smooth interiors. Work in progress, the first print didn't turn out so well.
Statistics
Likes
1
Downloads
0