Banjo Pickup Mount
Description
This is humbucker pickup holder that can be used to convert a banjo into an electric-banjo. 4x M3x20mm socket head caps hold the clamp to the mount. I also uses 2 more of these socket head caps for my pickup as I didn't have the screws that came with it. Once printed just mount the pickup life you would on a guitar with the screws and springs. Try to set the height of the pickup to be as close the banjo head as possible without touching it. As the pickup is further away than with a guitar the signal is lower. To account for this a overdrive or compression pedal can be used to boost the signal to normal guitar levels. https://www.youtube.com/watch?v=ULbDT8acPzc&ab_channel=DeanCoyle
Statistics
Likes
4
Downloads
0