X400VU v.0.1 - 3D Printable 400mm Quadcopter
Description
This is a 3D printable quadrotor frame I created using Fusion 360 for an online seminar at Maranatha Christian University Indonesia. The model is designed to be printed in a printer with at least 220x220mm print area. I used Creality Ender 3 to print the models and they turned out quite good. Requires a lot of M3 nuts and bolts. This project is still in progress and I might make some improvements in the future. Frame weights about 230g. Drive system I used for the drone: Motor: Multistar Elite 2212-935KV Prop: 1045 APC SF ESC: 20A Battery: 3S 2200mAh 40C Anything made for a 400-450mm system like the DJI F450 should work well with this frame too. The maximum propeller diameter is 10inch.
Statistics
Likes
6
Downloads
0