Customizable folding bit/pencil holder (fusion360)
Description
--- Thank you to SenJos for motivating me. --- --- Due to the large number of parameters, it may still contain bugs. Please pardon. --- This is the customizable version of my thing "Folding Hex Bit Holder"(https://www.thingiverse.com/thing:4750734) It can hold the hex bits, the color pencils or other cylindrical objects. Customization is done by changing the parameters of fusion360 file (.f3d). Try this once. [Bolt type to use] type: CAP bolt M3, M4, M5, M6 ...(M3 is standard) bolt length: The recommended length is 15mm(M3), 20mm(M4), 25mm(M5), 30mm(M6) ... *When using screws other than M3 by changing the corresponding parameters, but it may not work because almost not verified. Sorry.* [Customizable parameters] -target diameter (min:5mm, max: no limit) -number of holes in a bar (min: 2, max: 24) -number of bars you will combine (min:3, max: no limit) -bar additional height (min:0mm, max: no limit) It may be effective when used for a tall target. When changing the bolt diameter, change the following parameters. -bolt diameter (M3=3, M4=4, M5=5, M6=6 ...) -bolt head diameter (M3=5.5, M4=7.0, M5=8.5, M6=10.0 ...) -bolt head height (M3=3.0, M4=4.0, M5=5.0, M6=6.0 ...) [print conditions] filament ... PETG support ... Yes (It is better to block the support for the bit hole part.) brim ... No infill ... bar:0% (Highly recommended), binder:15%-100% perimeters ... 2 or 3 lines (Please select with the tightness of inserting the bit) [caution] Since the input value of the parameter is not verified in fusion360, an error may occur. For example, when using a large bolt for a small target diameter. If an error occurs, click the OK button in the parameter change window, and then click the undo button to return. [note] I'm looking forward to makes and remixes. Please upload yours.
Statistics
Likes
34
Downloads
0