Porch Glider Rocker 1:12 Scale
Description
Model of a Porch Swing Glider at 1:12 scale. Print all parts as a unit, or you can use the individual parts to print what you need. Frame is assembled by inserting the pins into the back of the frame ends. Then insert the slats into the slots in the back of the frame ends. The glider pins are printed separately on their side with supports to give them more strength. They will break easily if you print them on end without supports. Once the frame is assembled, slide the glider arms over the pegs. Then hang the seat from the other end of the glider arms with on it's pegs. Glider will now rock back and forth.
Statistics
Likes
9
Downloads
0