FlameWheel F550 Extended Arm for Larger Propellers
Description
An extended version of the arm so that larger props can be used. This just fits diagonally on my FlashForge Creator Pro 2 print bed. The total part length is 255mm. If you use the extended arm you can fit props up to 11". If you alternate between the extended arm and the 'lower' extended arm, then you can fit up to 15" props which overlap in the Z axis. The overlap loses some efficiency and may introduce some additional vibration - but you can gain an awful lot of additional prop! I use the 'motor raiser' to further increase the Z distance between my props to ensure they can't clip each other. See the photo.
Statistics
Likes
4
Downloads
0