Steer Tube Cutting Guide
Description
Saw guide for cutting 1-1/8" bicycle fork steer tubes. Can be clamped in a vise, insert the steer tube, tighten the top screw to hold it in place, and then cut with a hacksaw in the 2mm wide opening. Sized to accommodate carbon specific saw blades. Also requires: (2) M6 x 20mm bolts (1) M6 x 35mm bolt (3) M6 nuts Assembly: 1. Attach the front and back using the M6 x 20mm bolts and two nuts. 2. Drop an M6 nut into the opening in the back piece. 3. Start to thread the M6 x 35mm bolt from the top through the nut. 4. Put the insert in place, drop the retainer into the opening on the insert. 5. Use a flat blade screwdriver to prevent the retainer from rotating. 6. Finish threading the M6 x 35mm bolt into the retainer.
Statistics
Likes
6
Downloads
0