Seeeduino XAIO Board Mount 4 Types
Description
I found these tiny arduino compatible boards made by Seeeduino called the XAIO. It's as small as a quarter. I bought a few, powered them up and tested them successfully so I decide to make these mounts. I printed them all on the flat side using supports. Each one took about 12 minutes each to print. Board snap fits into housing. M2 scews to mount. Printer settings: Layer .08 Fill 5% (part is so small this doesn't really matter) Speed 30 Support Touching buildplate Support type- Lines 45 degree 15% fill x/y=1.0 z=.19 ________________________________________
Statistics
Likes
4
Downloads
0