Magnetic 3D Printed Arm Kit for Rostock Nano
Description
Another mod for the [Rostock Nano](https://www.thingiverse.com/thing:2764097)! This one lets you use 3 X 8x3mm powerful magnets in each end of 3D printed arms with 10mm steel balls that have a M4 hole in them on the machine. You will need 12x M4x10 socket head screws to mount the balls and 3x M3x10 screws to mount the E3D V6 or clone. You drop the 3 magnets down in the arm end then glue it to the rod and repeat! Uses all other standard Rostock parts. You need 3 E3D clamps, 6 Arms, 12 caps, 3 carriages, and 1 effector. The 3 locks pinch in the extruder tight. Use CA or Superglue to assemble the magnet in the arms. It comes with a BLTouch mount. You need 1 of the BLTouch clamps and 2 of the regular E3D clamps also the BLTouch bar and some M3 screws to attach it. The offset is 23mm from nozzle, depending on where it's clocked it might be something like X -11.5 Y -11.5 Z -1 or whatever. #Not yet tested! #Thank you!
Statistics
Likes
4
Downloads
0