Guitar and Pedal Repair Finger Sockets
Description
Small set of sockets that you can use to lightly tighten things, such as guitar and effect pedal jacks, knobs, etc. These are pretty much "self-torquing" and wong allow for you to overtighten, but...do not overtighten :) I have also included multiples of the 13mm socket, with shallow, deep and a narrow version that can be used on a telecaster input jack, or other recessed jacks. Recommend 100% infill or if you want to experiment try at least 5 walls and 3 top layers to maintain rigidity. Letters on bottom and internal will print without support, but make sure you have your printer set up for good bridging to prevent poor layer adhesion (although it's not super critical if there are some strings at the bottom of the socket.)
Statistics
Likes
2
Downloads
0