Xfinity Pro (Aldi) Battery to Ryobi Skin
Description
Probably a bunch of people in Australia wanting this, all the other parts are from the donor object this was remixed from. Remixed from (Thingiverse remix linking not working for me): https://www.thingiverse.com/thing:2007996 https://www.thingiverse.com/thing:1811192 Thanks Simhopp Extra requirements 2 x Spade connectors 2 x metal strips 1.7" x 0.5" 4 x M3 nuts 4 x M3 10mm socket head bolts 2 x wires **Update 23/5/21** Uploaded all the parts from the donor designs so everything i in one place Centered the slide rails and there were off by 0.55mm Also enlarged hexagonal reliefs for the nuts so it's easier to get them in there **Update 5/8/21** Updated files to allow for better clearance on the sliding parts, added a cover for the Xfinity terminal installation access hole. Also enlarged bolt head cut out and ensured a 10mm M3 bolt will fit. My experimenting with springs, I think a 40mm long, 5mm diameter, 0.6 guage spring will work the best.
Statistics
Likes
6
Downloads
0