SO-DO Kamen Rider Build hands
Description
These hands were made for the SO-DO Kamen Rider figure line, which are 1:18 scale. These hands in particular are for the standard SO-DO pegholes, used from Ex-Aid to Zero-One. My hands provide a balljoint rather than a peg, adding a nuance to the poses you can do. This hand uses the Build armor design, so it is made to go with the following figures: - Kamen Rider Build (Dai SO-DO version only) - Kamen Rider Cross-Z (Dai SO-DO version only) - Kamen Rider Metal Build (Which is also Build: RabbitTank Hazard Form) - Kamen Rider Zi-O: DecadeArmor BuildForm Also, as you may know, Build's main form (and Zi-O's DecadeArmor BuildForm) uses two different colors for the left and right side. I've included optional left/right files for all of these. The files included: - build-fist - A clenched fist without an item peghole. - build-item - Item-holding hands with a 3mm peghole. - build-open - Standard SO-DO style open hands. - build-signature-out - The signature pose hand for Build. In my case, I used a Flashforge Finder Lite to print these in PLA, but the small size means you're better off using a resin approach. Models have been positioned for you. Support needed on all files. SO-DO uses different peghole sizes for the left and right, so these are not made to be mirrored.
Statistics
Likes
0
Downloads
0