CR10s Pro Linear Rail Mod
Description
Easy upgrade for the CR10s Pro to MGN12 Linear rails. You can use the original Extruder Plate fom the CR10s Pro. The lower wheel can stay in place as a additional guide. The extruder plate not change the position in X-direction The only hardware modification are 4 3.2mm holes in the mounting plate for the heating bed. What you need: 3 MGN12 400mm Rails Profile 20x20x50 min 3pce M3 T-Nuts M3x8 Hex screws M5 Hex screws to attache the 20x20 profiles on the X-gantry M5 T-Nuts
Statistics
Likes
10
Downloads
0