Hero Me Gen 5 Base for Dragon Hotend and Orbiter Extruder
Description
I wanted to mount a Dragon hotend on the CoreXY I was building with the Orbiter extruder above it, neither of which are standard for that design, so I used this base as a foundation to design a platform to mount the Orbiter. The platform and the extruder itself might have vertical clearance issues depending on the design of the printer. Like the normal V6 design, it will probably work best with the air dam in the back. No modifications have been made to any other part of the design so it should still work with all of the fan and accessory mounting options, though you may need a new cable routing solution since the existing cable route goes right into the Orbiter motor.
Statistics
Likes
13
Downloads
0