Clone's brush holder
Description
This is a 2D style clone phase 1 mask with the purpose of holding your tootbrush, paint brushes, or anything you can fit in a 15x15x60 mm hole. The rough dimensions of the head are 50x40x70 mm. You can print it stand-up to have a nice finish, but you'll need few tiny supports, or flat for a quick print. I recommend making 5-8 solid bottom layers, and you can lower the infill to 5%, so at the end it will result in a 3/4 hour print. I used white pla and than painted it with acrilic paints. Hope you like it
Statistics
Likes
8
Downloads
0