Solar Powered WiFi Weather Station V3.0
Description
This is a Solar-powered wireless weather station by using an ESP32 Wifi Module and few common weather sensors available in the market. Full Project is available on Instructables: https://www.instructables.com/Solar-Powered-WiFi-Weather-Station-V30/ Credit: This enclosure is designed by my friend Glen Lewis Update:05.04.2021: For modifications, you can download the STEP files from GRABCAD Components Used: 1. ESP32 Dev Kit V1- 30 Pins ( Aliexpress / Banggood ) 2. TP4056 ( Aliexpress / Banggood ) 3. Barometric Pressure sensor BME280 ( Amazon / Banggood ) 4. Temperature Sensor - DS18B20 ( Amazon / Banggood ) 5. UV Index Sensor - GY1145 ( Amazon / Banggood ) 6. Lux Level Sensor - BH1750 ( Amazon / Banggood ) 7. Wind & Rain Sensor ( Amazon / Sparkfun ) 8. MCP1700-3.3V ( Amazon) 9. Resistors - 2 x 1K, 1 x 10K, 3 x 4.7K, 1 x 27K, 1 x 100K ( Amazon / Banggood ) 10. Electrolytic Capacitor - 1 x 100uF ( Amazon / Banggood ) 11. Ceramic Capacitors - 4 x 0.1uF ( Amazon / Banggood ) 12. TVS Diode - DT1042-04SO ( Amazon ) - Optional 13. RJ11 Connector ( Aliexpress ) 14. Male / Female Headers ( Amazon / Banggood ) 15. Jumper Cap ( Amazon / Banggood ) 16. Screw Terminal-2P - 5.08mm pitch ( Amazon / Banggood ) 17. Screw Terminal -3P -3.5mm pitch ( Sparkfun ) 18. Solar Panel - 5V / 1.2Watt ( 110 x 69 mm ) - ( Amazon / Aliexpress / Banggood ) 19. 18650 Battery ( Banggood ) 20. 8650 Battery Holder ( Amazon / Banggood ) 21. 22 AWG Wires ( Amazon / Banggood ) 22. Jumper Wires M-F( Amazon / Banggood ) 23. Slide Switch ( Amazon / Banggood ) 24. PCB ( PCBWay ) Tools Used: 1. Soldering Iron ( Amazon / Banggood ) 2. Nipper ( Amazon / Banggood) 3. Wire Stripper ( Amazon / Banggood) 4. 3D Printer ( Amazon / Banggood) Link: https://grabcad.com/library/stevenson-screen-v3-for-open-green-energy-1
Statistics
Likes
337
Downloads
0