Slim Raspberry Pi Zero Case - Cryen remix
Description
I remixed the Slim Rpi0 case by tvarok to also fit the non W model with or without the header soldered. I've also made additional base plates to accommodate the pins. It's mounted the same way as the original, that is with screws or printed pins. Screws recommended in the original model are 2.5mm in diameter and 5mm long. Be aware, I have not tried the "H2" raster, which means it can be a bit too tight or too loose on that 2x2 part… but it also could be perfect so I'd appreciate the feedback.
Statistics
Likes
10
Downloads
0