Paintball Barrel Plug w/ hex wrench
Description
Paintball barrel plug with a built-in hex slot for an allen key. ----- **The slot is sized for a TIPX velocity adjuster** (3/16") To assemble: 1. Print the plug 1. Cut off a piece of hex key about 1 1/2" long 1. Glue the allen key in place, let dry for 24 hrs (I used gorilla glue. Anything that fills gaps will work well) 1. Tie a piece of 4mm shock cord 1. Optional: cover the hex tip with a rubber tubing (like the ones for aquarium air pumps) to prevent scratches Please support my work by hitting like =) ----- . . . . . _**Disclaimer**: This is not an ASTM approved barrel blocking device, you are on your own to test it to the [ASTM standards](https://www.astm.org/Standards/F2271.htm) and use at your own risk_
Statistics
Likes
5
Downloads
0