Ksc75 3d printed housing Grado style
Description
Hey guys, This is a quick model i designed that fits the ksc75 driver into a grado style earcup enclosure for a more comfortable fit. - Designed to take "S Cushions" perfectly which are standard sr60e/80e/125e pads. This design has been untested and may have poor tolerances but i will update the design if i ever do print it and try it out. I used callipers to check the dimensions of my own pair of ksc's but everyones could be different. V2 UPDATES!: - cap now should fit the body correctly - the body now takes standard grado pads over yaxi pads (cheaper, easier to get, larger) - the grille now has better styling more in line with actual grados - the headband part takes a 3mm rod which is the same as grado headphones. - INSTALLING THE DRIVERS SHOULD BE EASIER, they now drop in from the front instead of the back and have a slot for the cable to run through. When installing be careful not to break the little plastic pins used for holding the original pads on. - THIS MOD SHOULD ACCEPT THE MMCX ADAPTER MOD from gumo_design. https://www.thingiverse.com/thing:3378059
Statistics
Likes
5
Downloads
0