TFT35 + PITFT50 magnet display holders
Description
Hi all, I wanted to mount my TFT35 E3 V3.0 and PITFT50 BTT screens to LACK enclosure, so here we are - I've designed mounts to achieve that. For now only tested TFT35 case (on TFT35 frame there's some space for cables) and still need to check if TFT50 frame should be edited. Screen cases are remixed models taken from: https://www.thingiverse.com/thing:4221768 https://www.thingiverse.com/thing:4741768 You'll addidtionally need: - some 25mm M3 screws to attach two parts of screen cases to each other - 4x M3 6mm screws per screen holder - 4x two-part purse magnets (14mm wide) or 8x neodymium magnets (max 14mm wide) - 4x wood screw per holder - Cyanoacrylate glue Here's link to the example of purse magnet (it's only an example - under the link there are 18mm wide ones, not needed 14mm): https://www.amazon.com/New-Magnetic-Button-Clasp-Snaps/dp/B005T7OC7Q Everything should be printed once per screen except magnet holders - you'll need to print 4 of them per holder. - Display holder has 4 holes for mounting them to the LACK table with wood screws. - Frames has 4 holes to screw them with M3 6mm screws to the holders. - Frames has 4 rounded corners for the first part of purse magnet (magnet should be glued with cyanoacrylate glue). - Second part of the purse magnets should be glued into magnet holders. - Magnet holders have to be glued to the back of screen cases.
Statistics
Likes
5
Downloads
0