Glass Bed Clamp tested on Ender 5 plus
Description
*Testing update* Glass bed clamp Supports Ender5 Plus with Ender Glass bed 8mm bed and glass gap. *Testing* 21/04/2021: can't be used to make abs clamps due to the heat on the bed required. This has had 30+ of testing at 60C bed with PLA+ Some warping starts around 70C bed *Testing Notes* Overtime it will soften a bit and have some movement, I occasionally nip up the bolts. So far no other issues have come up. DO NOT OVERTIGHTEN Tested Print Settings Using 3D Fillies PLA+ Glass_bed_clamp_v1 Tested with cura standard quality 0.2mm with ender 5 plus Print Verticle with Brim support for extra strength. Tap maybe needed if unable to get threads overhang depending on printer quality. 200C Nozzle, 60C bed Fill 40% Print speed 80mm/s M8x1.25_0.2mm acuracy_bolt Tested with Cura Super quality 0.12mm ender 5 plus 200C Nozzle, 60C bed Fill 30% Print speed 80mm/s This is mostly untested, so far i am having success, please let me know if there is any issues and improvements that could be made.
Statistics
Likes
33
Downloads
0