SKR 1.4 Case
Description
Models available only on https://www.prusaprinters.org/cs/prints/93817-skr-14-turbo-bear-case I wanted some case for new skr 1.4 turbo that will look as Průšas case, so i made one, it is based on step files from internet, it is made for 2040 AL t-slot profiles, but it will work with 4040, and maybe with v-slot profiles, didn't tried. You can follow Průšas assembly instructions for this one too, except few nuts and screws, but in mirror manner. I have mirrored the case for better acces. It is not suitable for skr board with wifi module, but with few cables it can be connected anyway. https://help.prusa3d.com/en/guide/8-electronics-assembly_34416 In the door part is space for Noctua 40x10, there is probably no need for it, but i like the look, so i put it there. Parts should be printed as is You will need one pcs of each part You will need 4pcs M3x8 - 10 screws for f)fixing the board to the housing, they are tight fit, it should make its own threads in the printed holes. In the extruder cable bundle, there is 2,5mm hole for string from garden trimmer as the NYLON filament from the guide, it was what i had on hand. If you like the model or not, please comment or post a picture of your make :) Thanks
Statistics
Likes
9
Downloads
0