Customisable Lens Cap - Mamiya
Description
This is a customisable front lens cap. It was designed for a Mamiya RB67 but it also fits RZ67 and plenty other cameras, as the dimensions can be changed in the .f3d file. If you don't have fusion360 and need other dimensions you can contact me to change them. I would be very thankful for any donations under paypal.me/uwe765. Following files have been uploaded: -Mamiya_CostumisableFrontLensCap.f3d the fusion360 file with parameters -Mamiya_LensCapFront_Docum.pdf documentation with parameters description -Mamiya_LensCapFront_80mm.stl lens cap for an 80mm diameter lens, with Mamiya inscription and aesthetic circle. -Mamiya_LensCapFront_80mm_NoAsthetics.stl lens cap for an 80mm diameter lens, without aesthetics Printing: -Material I recommend a flexible filament, but PLA also works (to compensate for shrinking a scale factor of 100.2% to 100.25% is recommended for PLA). -Infill Infill of 100% can be used, as it saves time and has a higher rate for a successful print Everything else should be set to a standard profile. If you have any suggestions, please text me or leave a comment.
Statistics
Likes
5
Downloads
0