Ducted Holybro Kopis Mini
Description
Not sure why you ever would like to do this, but with this you can "duct" you kopis mini ;) You will need to source some screws and you need to use 75mm props "3 inches" not the included 31mm props.. I chose to use 75mm HQProps 6 or 8 blades for my whoops.. Screws you need to use 16 pcs 2x8mm for the motors.. 2 or 4 3x8mm, for the part where the ducts connects to the frame, but this depends on if your going to use the included camera mount, if your using that you going to need 2 3x10 screws instead of 2 3x8.. The insta360go tpu bumper shown in the pictures are from https://www.thingiverse.com/thing:4518021 And yeah BTW you need to print 2 of the STL with the ducts ;) Happy flying and happy crashing :)
Statistics
Likes
7
Downloads
0