Mendel90 fan duct LED holder
Description
A Led Holder For The Mendel90 Dibond Or Sturdy Fan Duct. Holds 2 5Mm Led With A Led Holder. All Parts From Radioshack. Pn: 276-0080 & Pn: 276-0017...I Used A Little Hot Glue To Hold It To The Fan Duct. Even With The Hotend At 275C It Still Holds Just Fine. You Will Also Need A 220 Ohms 1/4Watt Resistor If Using A 12V Supply For Both Leds In Series. Printed In Pla.. .3Mm Nozzle @ .22Mm Layer @ 60Mm/S @ 185C & 62C Bed. Sliced In Cura And Printed Thru Matterhacker With Infill At 75%. Wire It Up As You See Fit, However If You Want To Use My Method Of Hook Up, I Made A Power Supply And Ground Plane On A Perf Board And Connected It Ot The 12V Fan Supply. Now I Have Multiple Power Supply Outputs And Grounds.
Statistics
Likes
1
Downloads
0