IKEA LACK enclosure / table printer tower
Description
PRINT TOWER by Lilik7 created from 4 Ikea Lack tabels (3 boards and 16 legs) You need: 4 x 1000x500x2 (or 4) plexiglass 32x 4x40 screw 8x 3x15 screw 22x 4x25 bolt 6x 4x40 bolt 12x 4x25 bolt (countersunk head) 34x M4 nut 74x M4 pad You print: 2x A-LACK 2x B-LACK 2x C-LACK 6x D-LACK 2x E-LACK 4x F-LACK 4x G-LACK 1x handle 3 1x handle D (1x CAM holder) (1x screen cover) Instruction: 1/ Assemble T1 and T2 (use Ikea instructions) 2/ Connect T1 and T2 with G - LACK 3/ Assemble T4 - between legs and board use A - LACK, B - LACK and 2x F - LACK 4/ Screw on A - LACK, B - LACK and 2x F - LACK on board of T2 and screw on T3 on T2 5/ Screw on 2x C - LACK and 2x E - LACK on T3 6/ Put on it T4 and screw it 7/ Measure and cut the plexiglass 8/ Catch on side and back plexiglass 9/ Connect D - LACK 10/ Measure position of front plexiglass (doors) and screw it 11/ Put HANDLE on doors (50 mm between screws) 12/ If possible, cut a hole for the cables 13/ Place the 3D printer 14/ Send photos of your print tower!
Statistics
Likes
85
Downloads
0