Incukit Mini Holder for Epax E10
Description
This is designed to hold an Incukit Mini inside the canopy of the Epax E10 printer. It has been tested with the 8.9" 4K version only but the base is designed to fit around the Z-Axis so that it holds the heater away from the build plate through it's entire travel distance. This may work with the 10.1" 5K version but it is not available yet at the time this was designed. The holder holds the display facing the back of the printer but this keeps the heater element closer to the vat. A cutout allows the power cable to be tucked behind the holder and out of the way. You will need to put a notch in the canopy for the cable. This could be easily modified to fit other printers as well, feel free to remix. PLA seems to work fine with this but I would suggest PETG or PC for heat and chemical resistance.
Statistics
Likes
6
Downloads
0