Fully Customizable Hook
Description
Don't get hung up the next time you're trying to find somewhere to put your your keys, bag or jacket. Our latest design is here to help; a fully customizable hook! This design is **_completely free_** and shared under a permissive license. Your [support](https://codeandmake.com/support) is hugely appreciated. Did you know? ------------------- Some of our designs cannot be found on Thingiverse. If you are looking for more, check out our premium projects: https://codeandmake.com/premium OpenSCAD Customizer Options --------------------------- Please note: The .SCAD file included in this project is not compatible with the Thingiverse Customizer app. We recommend you use the latest version of [OpenSCAD](https://openscad.org/) to customize this design instead. This design has the following Customizer options: ### Material * `Material_Thickness` - Thickness of the material * `Corner_Radius_Percentage` - The size of the corner radius as a percentage ### Hook * `Hook_Inside_Diameter` - The inside diameter of the hook * `Hook_Width` - The width of the hook (unless the screw size commands larger) * `Hook_Lip_Shape` - The shape of the hook lip ### Screw * `Screw_Hole_Diameter` - The diameter of the screw hole * `Screw_Head_Diameter` - The diameter of the screw head * `Screw_Head_Countersink_Angle` - Screw countersink angle (82 and 90 are common) Design Considerations --------------------- If printing without supports, we recommend using a low `Corner_Radius_Percentage` value, otherwise you may experience overhang issues. However, we recommend always setting a `Corner_Radius_Percentage` value of, say, at least ~10% to remove any sharp edges. You may need to experiment with the `Corner_Radius_Percentage` value and/or your printer settings to obtain the best results when printing without supports. Material -------- We recommend printing this in a durable filament, such as ABS. Versions -------- * 1.1 (30 Mar 2021) - Small correction to customizer comment * 1.0 (30 Mar 2021) - Initial version Printing -------- Recommended slicer settings: * Resolution: 0.1mm - 0.2mm * Infill: ~50% or higher if you need it to be extra durable. * Supports: Should not be required unless you use a high `Corner_Radius_Percentage` value. * Rafts: Not required, unless you experience adhesion issues. License ------- The "Hook" models (.stl) are licensed under the [CC BY](https://creativecommons.org/licenses/by/4.0/) license by [Code and Make](https://codeandmake.com/). The "Hook" code (.scad) is licensed under [The MIT License](https://opensource.org/licenses/MIT) by [Code and Make](https://codeandmake.com/). Note: 'BSD' license has been selected as it is the closest available option in the list. We are proud to offer content to you absolutely free. ------- We love to create free content for you. As you might imagine, it takes a lot of time. Supporters help us fund materials and equipment to create future projects and tutorials. To show your appreciation, please use the link below: https://codeandmake.com/support We thank you so much for your support!
Statistics
Likes
1228
Downloads
0